eigen frequency
I'm able to get frequency in complex no can i able to get it in real no only
View Articleanalysis
I unable two get the same resonant frequency for eigen frequency and frequency domain solver
View ArticleHow to move one geometry object continuously in matlab .m file?
Hi, I am a comsol user and I have built a 3D model,in which a small bubble flows inside a glass tube is simulated. I plan to make the bubble move from 0.11m to 0.21m continuously with a step of 0.001m....
View ArticleLithium ion battery 1D model: solver error
hi, I am trying to solve the Lithium ion battery model from the model library (li_battery_1d). I am always getting this error message while solving study1 in it .Please help me on this. Repeated error...
View ArticleMultiple input ports in RF problems
Hello to everyone. The RF module Users Guide, at page 72, says (Note at the top of the page) that it is possible to have more than an excited inport, with the drawback that S-parameters are not...
View ArticleNavier-Stokes Simulation using General Form PDE: The Continuity Equation
Greetings all. I am working to solve a standard fluid flow problem (e.g. flow in a pipe as a start) using the General Form PDE interfaces instead of the Fluid Flow built in GUI. I am able to define a...
View Articlenumerical oscillation in modelling corona discharge with coefficient form...
Hi,everyone I,m working on modelling corona discharge in air with coefficient form PDEs and Electrostatics interface. I'm encountering the problem of numerical oscillation in the simulation area...
View ArticleElectrostatic Precipitator... Help!!
Hello I want to simulate an Electrostatic Precipitator. In conditions of laminar flow field and electric filed, it is requierd how many particles are gathered. However, in my simulation, the efficiency...
View Articleerror: The object 'Type: Save Point Geometry Tag: geom1' is not contained in...
Hi all- I have been working on a model for some time, and just trying to optimize the solver settings. I saved the model today, and then opened it up again to work on it, and now get this error for any...
View ArticleSetting initial values for an iterative solver
Comsol user interface shows some options for setting initial values at the stationary study step at 'Initial values of variables solved for'. These are either zero or a solution - but we want to set...
View ArticleCFD - Surface roughness
Hey guys I really need your help on this one! I was wondering if any of you could tell me about the default settings of surface roughness's in COMSOL? All I've found about it in the documentation is...
View ArticleEFFECTIVE INDEX
Hi eveybody. Actually I am trying to plot effective index of PCF with variation of diameter in COMSOL.I could not know how to put the diameter values and where to put.Please help me in this regard.I am...
View Articleapplying a magnetic field
Hello, I would like to know how to apply a magnetic field on metal electrodes of a Surface acoustic wave resonator using COMSOL 3.5 a. Thak you
View Articlecreating a coordinate system in the matlab console
Hello everyone, is there a specific function for drawing a coordinate system over the Matlab LiveLink in the Matlab console? I'm not yet familiar with all the functions concerning the LiveLink. My aim...
View ArticleDistance between two points
Hi ! Suppose I put two circles at position (0,0) and (0,2). If I rotate the second circle with respect to first(0,0) at a range (0,60,360), it gives a hexagon.Is there any way to confirm the distance...
View ArticleGenerating thermal resistance and thermal capacitance of model; OR import...
Hello everyone, I've been trying to control a heat exchanger model build with comsol. The idea is to control the temperature of the fluid running through the aluminium heat exchanger heated by two...
View Articlemodeling a Non-Newtonian fluid in rotating machinery
I modeled a rotating machinery and defined Non-Newtonian fluid in model. Unfortunately, when I run the model this problem occurred: Failed to find time step so that given tolerance are satisfied. What...
View Articlesplit a rotating machinery
I want to split a mixer (rotating machinery) into 4 part and then define a unique particle tracing physics for each part. How can I do this?
View Articleprescribed dispacement
Hello, I'm trying to do a simple thing with structural mechanics module, but I don't get convergence. I attached the model. I'd like to apply a prescribed displacement at boundary 2 and check the...
View ArticleHow to solve laplacian euqations on dielectric sphere?
Hi everyone, I'm a starter of Comsol~ I was trying to solve laplacian euqations on a dielectric sphere with a non unity permittivity e, where a uniform electrical field E was applied outside the...
View Article